Planet SIP IP Phone User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. IP Phone
  5. SIP IP Phone
  6. User manual

Planet SIP IP Phone User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SIP IP Phone
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Planet SIP IP Phone

Summary of Contents for Planet SIP IP Phone

  • Page 1 SIP IP Phone User’s Manual...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1 Overview of the VIP-152T................... 1 1.1 Hardware Overview....................2 1.1.1 Front View and Keypad function ..............2 1.1.2 Rear panel....................3 1.1.3 Specification ....................4 1.2 Software Features and Specification ..............5 Chapter 2 Configuring the VIP-152T through LCD Phone menu......... 7 2.1 Initialize VIP-152T ....................
  • Page 3 4.11. [flash] command ....................34 4.12. [sysconf] command ................... 34 4.13. [sip] command ....................35 4.14. [security] command ................... 37 4.15. [voice] command ....................37 4.16. [tos] command....................39 4.17. [bureau] command .................... 40 4.18. [rom] command ....................40 4.19. [passwd] command ................... 41 Chapter 5 Upgrading Software on the VIP-152T ...............

  • Page 4: Chapter 1 Overview Of The Vip-152T

    Chapter 1 Overview of the VIP-152T Based on the next-generation Internet telephony service demands--Session Initialization Protocol (SIP), the PLANET VIP-152T brings cost-effective solution for voice communications and interoperates with major other-vendor VoIP hardware and systems as well as the traditions of PLANET VoIP family. As a feature-rich IP Phone, the VIP-152T fulfills your needs.

  • Page 5: Hardware Overview

    1.1 Hardware Overview 1.1.1 Front View and Keypad function ¨ System Indication LED: When VIP-152T didn’t register to Proxy server or having incoming call, system indication LED will be blinking. ¨ MENU: Press to enter LCD Menu when in standby mode; if already in LCD Menu, press this button can return to standby mode ¨...

  • Page 6: Rear Panel

    ¨ REDIAL / HOLD: 1. Redial the last outgoing call or hold one call in communication. 2. Upper-case/Lower-case character: change input character mode to be upper-case or lower-case. ¨ SPEAKER: Speaking without picking up handset. ¨ 5 Graphic Memory key: User presses these keys to do speed dial according to phone book data 1-5 (please refer to LCD configuration-Phone Book, Configuring the VIP-152T through Telnet command lines - [pbook] command, or Web Configuration-Phone Book chapter).

  • Page 7: Specification

    1.1.3 Specification 1. Ethernet Port： Ethernet port is for connecting VIP-152T to network, transmit rate supports 10/100 Base-T. Ethernet connector（LAN） PLANET VIP-152T User’s Manual...

  • Page 8: Software Features And Specification

    1.2 Software Features and Specification Application: ISP/ITSP (Internet Telephony Service Provider) IP-PBX with office telephony services Multi-nation enterprise communication SOHO Telephony Calling Features Call Hold Call Transfer Call Forward 5 configurable speed dials Network Supported Fixed IP Dynamic Host Configuration Protocol (DHCP) PPPoE connection (When PPPoE disconnect, VIP-152T can automatically re-connect) Behind NAT IP Sharing Device Support QOS by setting DSCP (Differentiated Service Code Point) parameters of VoIP packet...
  • Page 9 Three easy ways for system configuration LCD Front Panel Web Browser Telnet Environmental Operating and storage Humidity: 10 to 95 % (Non-condensing) Operational Temperature: 0 to +40 °C Storage Temperature: -10 to 60℃ PLANET VIP-152T User’s Manual...

  • Page 10: Chapter 2 Configuring The Vip-152T Through Lcd Phone Menu

    Chapter 2 Configuring the VIP-152T through LCD Phone menu 1. After any configuration has changed for the VIP-152T, user has to do reboot in the selection “Reboot”. 2. It is suggested to setup IP address via LCD menu Network→Get IP mode / IP Address / Subnet Mask / Default GW first, then go to chapter 3 to do other configurations via web Note: browser.
  • Page 11 Press MENU to enter configuration mode then press OK to enter sub menus; press FLASH can jump out current menu to previous level. Call List Forward Phone Book Ringer Network Advanced Set (can be protected by password) Reboot PLANET VIP-152T User’s Manual...

  • Page 12: Lcd Menu Configuration

    2.2 LCD Menu Configuration User can set the following configurations via LCD keypad. Press REDIAL/HOLD before input data can switch characters to be capital or lowercase. Press MUTE before input data can switch input mode to be character mode or IP mode; Note: for example, user wants to enter IP address, after pressing SPEED can enter digits directly.
  • Page 13 Uncondition (Unconditional Forward) It is included the above two types. Whether the VIP-152T is in which status, calls will be automatically forwarded to the assigned phone number. A. Activate Enter a forwarded phone number to activate Unconditional Forward function. B. Deactivate Deactivate Unconditional Forward function.
  • Page 14 5. Network Information User can press ▼ or ▲ to check current network status: (1) Mode: Display current network connection mode of VIP-152T to be Static (Fixed IP), DHCP, or PPPoE. (2) IP, Mask, Gateway: display current IP information. Get IP Mode Set network mode of VIP-152T to be Fix (Fixed IP), DHCP, or PoE (PPPoE).
  • Page 15 Return to upper level of LCD Menu IP-Sharing (1) If VIP-152T is behind IP sharing or NAT device, and VIP-152T is under Peer-to-Peer mode or Proxy mode (doesn’t support endpoint behind NAT function), on IP sharing must enable “DMZ” function or set “Virtual Server” to open ports (UDP port: 5060 and 16384, 16385).
  • Page 16 re-register to Proxy Server again. E. Exit Return to upper level of LCD Menu (3) User Info A. User Name (Mandatory) Set User Name of VIP-152T to register to Proxy Server. If Proxy server doesn’t request specific User name, please enter Line number here. B.
  • Page 17 (8) Exit Return to upper level of LCD Menu Download via LCD command can only upgrade new application rom file. Note: Menu Password Set entry password of phone LCD menu. Exit Return to upper level of LCD Menu 7. Reboot Reboot machine.

  • Page 18: Chapter 3 Configuring The Vip-152T Through Web

    Chapter 3 Configuring the VIP-152T through Web Pages The VIP-152T web management interface provides user an easier way to configure rather than command line method through TELNET. The configuration function and steps are similar with the way through command line. Please refer to the chapter 4-Configuring the VIP-152T through Telnet command lines for more detail information.

  • Page 19: Step 3. Enter The Web Interface Main Screen

    User can set password later in PASSWORD configuration menu.. Note: Step 3. Enter the web interface main screen After logging in machine, user can see web interface main screen as below. Step 4. Start configuration Most important items are Network Interface, SIP Information, and Phone Book (in Peer-to-Peer mode). Please remember to configure these commands before start to work with VIP-152T.

  • Page 20: Network Interface

    After change any settings, please remember to reboot (in Reboot System) VIP-152T so that Note: changes can take effect. 1. Network Interface IP Address: Set IP Address of VIP-152T Subnet Mask: Set the Subnet Mask of VIP-152T Default routing gateway: Set Default routing gateway of VIP-152T Get IP Mode: User has to set VIP-152T to use which network mode.
  • Page 21 GMT: Set time zone for SNTP Server time User can set different time zone according to the location of VIP-152T. For example, in Taiwan the time zone should be set as 8,which means GMT+8. IP Sharing: Enable it if VIP-152T is behind IP Sharing router. UPnP: Enable it if IP sharing or NAT device supports UPnP function so that no need to configure IP sharing or VIP-152T when VIP-152T is behind NAT device.

  • Page 22: Sip Information

    2. SIP Information Run Mode: Select VIP-152T to work under Peer-to-Peer mode or Proxy mode. Proxy IP Address: Set Proxy IP Address or URL address (Domain Name Server must be configured. Please refer to Network Interface). Outbound Proxy: Set IP Address or URL address (Domain Name Server must be configured. Please refer to Network Configure) of outbound Proxy server.
  • Page 23 RTP Port: set RTP port for sending voice data. Expire: set expire time of registration. VIP-152T will keep re-registering to proxy server before expire timed out PLANET VIP-152T User’s Manual...

  • Page 24: System Configuration

    3. System Configuration Keypad DTMF Type: set DTMF type. User can select DTMF type VIP-152T transmits. RFC2833 Payload Type: change RFC2833 Payload type. This is for special request from the other site, if RFC2833 payload types of 2 sites are different, it may cause some problem of connection. Inter Digit Time: Set the DTMF inter digit time (second) To set the duration (in second) of two pressed digits in dial mode as timed out.

  • Page 25: Pppoe Configure

    4. PPPoE Configure User Name: Set PPPoE authentication User Name. Password: Set PPPoE authentication password. Reboot After Remote Host Disconnection: Enable/Disable auto reboot after PPPoE disconnection If user enables this function, after PPPoE being disconnected, VIP-152T will automatically reboot to re-connect, and after reboot, if VIP-152T still can’t get contact with server, VIP-152T will keep trying to connect.

  • Page 26: Voice Setting

    5. Voice Setting Codec Priority: set codecs priority in order. Please notice that user can set from 1 to 5 codecs as their need. For example, user can only set first priority as G.723.1, and set the others as x, that means only G.723.1 is available.

  • Page 27: Phone Book

    6. Phone Book Add Data: User can specify only 10 sets of phone book via web interface. Please input index, Name, IP Address and E.164 number of the destination device. From Telnet command line can set up to 100 sets of phone book data. Delete Date: User can delete any configured phone book data by assign index.

  • Page 28: Password

    7. Password Change: First select login name as root or administrator, then enter current password, new password and confirm new password again to set new password. Abort: Press abort will clean all inputs. User who requests authorization to execute all configuration commands needs to login with “root”.

  • Page 29: Firmware Upgrade

    8. Firmware Upgrade FTP/TFTP Server IP Address: Set TFTP server IP address Target File name: Set file name prepared to upgrade Method: Select download method as TFTP or FTP FTP Login: Set FTP login name and password Target File Type: Select which sector of VIP-152T to upgrade PLANET VIP-152T User’s Manual...

  • Page 30: Version Information

    9. Version Information Application: Application image version information of VIP-152T. This field has no default value. PLANET VIP-152T User’s Manual...

  • Page 31: Reboot System

    10. Reboot System Press reboot will reset VIP-152T. To execute reboot via web browser, VIP-152T will automatically save all data before reboot. Note: To execute reboot via TELNET command, please remember to do commit before reboot. PLANET VIP-152T User’s Manual...

  • Page 32: Chapter 4 Configuring The Vip-152T Through Telnet Command Lines

    Chapter 4 Configuring the VIP-152T through Telnet command lines After setting up the network parameters of VIP-152T, you may now enter the Telnet command lines for more options in machine configuration. • After user enter VIP-152T configuration via telnet, please use login: ”root”, password: null, press enter to enter command lines.

  • Page 33: Quit] Command

    4.2. [quit] command Type quit/exit/close will logout VIP-152T and Telnet Program. 4.3. [debug] command This command is for engineers to debug system of VIP-152T. User can add debug flag via command debug –add “debug flags”, and then start debug function via command debug –open. When VIP-152T is working on screen will display related debug messages.

  • Page 34: Commit] Command

    (pbook –print). Furthermore, user can also print only a section of data by indicate parameter “start index” and “end index” (pbook –print “start index” “end index”). If parameter “end index” is omitted, only record “start index” will be displayed. (pbook –print “start prefix”). 2.

  • Page 35: Ping] Command

    4.7. [ping] command Command ping can test which the IP address is reachable or not. Usage: ping “IP address” The message will display packets transmitting condition or no answer from the IP address. usr/config$ ping 168.95.1.1 PING 168.95.1.1: 56 data bytes 64 bytes from 168.95.1.1: icmp_seq=0.

  • Page 36: Pppoe] Command

    5. -dns: User can set primary and secondary Domain Name Server IP address. Once VIP-152T can connect with DNS server, user can specify URL address instead of IP address for Proxy Server and phone book IP address...etc. (ifaddr –dns 1 “primary DNS server address” –dns 2 “secondary DNS server address”) 6.

  • Page 37: Flash] Command

    2. –id: to set PPPoE authentication user name. 3. –pwd: to set PPPoE authentication password. 4. –reboot: Select enable or disable this function. If user enables this function, after PPPoE disconnected, VIP-152T will automatically reboot to re-connect, and after reboot, if VIP-152T still can’t connect with server, VIP-152T will keep trying to connect.

  • Page 38: Sip] Command

    2. -idtime: set the duration(in second) of two pressed digits in dial mode as timed out. If after the duration user hasn’t pressed next number, VIP-152T will dial out all number pressed. 3. -keypad: set DTMF type .User can select DTMF type VIP-152T receive and transmit.(sysconf –keypad 0/1 , 0 for in band ,1 for RFC2833.) 4.
  • Page 39 function is for special proxy server. 7. –line: identify one number for the VIP-152T to register to the Proxy (SIP –line “line number”). In proxy mode please remember to set user account information under security command. Note: 8. –pbsearch: enable/disable phone book search function under Proxy Mode. If user enabled this function, VIP-152T will search dialed number in phone book to see if there is any matched table before send to Proxy server, and if there is a matched data in phone book, VIP-152T will make call to related IP address.

  • Page 40: Security] Command

    4.14. [security] command 1. –print: display all current configurations. 2. -name: set user ID of VIP-152T for registering. User can set user name and password for registering. If password is no need, please set user name the same as line number or VIP-152T won’t register successfully.
  • Page 41 volume”, voice –volume input “value of volume”, voice –volume dfmt “value of volume”) If value of volume set as 0 means –32db, 1 means –31db…etc. Note: 5. -nscng: enable or disable sound compression and comfort noise generation. It is only for codec G.723.1.

  • Page 42: Tos] Command

    4.16. [tos] command TOS/DiffServ (DS) priority function can discriminate the Differentiated Service Code Point (DSCP) of the DS field in the IP packet header, and map each Code Point to a corresponding egress traffic priority. As per the definition in RFC2474, the DS field is Type-of-Service (TOS) octet in IPv4. The recommended DiffServ Code Point is defined in RFC2597 to classify the traffic into different service classes.

  • Page 43: Bureau] Command

    4.17. [bureau] command 1. -print: display all current configurations. 2. –hotline: set hotline IP and remote phone number. If user has enable Hotline function, once VIP-152T been off-hook, it will automatically dial out to assigned IP and phone number. (bureau –hotline “IP of destination” “Phone number of destination”) To set VIP-152T under hotline mode must set following configurations: 1.

  • Page 44: Passwd] Command

    6. -f: the file name prepared for upgrading is necessary as well. 7. –method: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP) 8. –ftp: specify user name and password for FTP download method. For example: User prepares to upgrade the latest app rom file – vip152t.100, the TFTP server is 192.168.0.10, User has to input command as below: rom –app –s 192.168.0.1 –f vip152t.100 usr/config$ rom...
  • Page 45 2. –clean: clean up password restored before, and user can login :”root/administrator”, password: ”press enter”. User who requests authorization to execute all configuration commands needs to login with “root”. If a user login with “administrator”, commands below are not functional: B.

  • Page 46: Chapter 5 Upgrading Software On The Vip-152T

    Chapter 5 Upgrading Software on the VIP-152T VIP-152T supports three methods to upgrade the new version. All methods are necessary to prepare the TFTP or FTP program on the host PC as TFTP/FTP server. After installing TFTP/FTP program on one PC and connecting to network, VIP-152T is ready to be upgraded.

  • Page 47: Web Management

    Download via LCD command can only upgrade new application rom file. Note: 5.2 Web Management FTP/TFTP Server IP Address: Set TFTP server IP address Target File name: Set file name prepared to upgrade Method: Select download method as TFTP or FTP FTP Login: Set FTP login name and password Target File Type: Select which sector of VIP-152T to upgrade 1.
  • Page 48 3. -boot2m: to upgrade 2mb rom file, which includes all firmware file mentioned in item 2. 4. -s: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware rom file. 5. -f: the file name prepared for upgrading is necessary as well. 6.

This manual is also suitable for:

Vip-152t

Table of Contents