Dell Precision Workstation 370 User's & Service Manual page 73

1 filler bracket
2 alignment bar
3 alignment guide
4 retention arm
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer
cover from closing properly or cause damage to the equipment.
11. If you installed a PCI Express graphics card that runs up to 150 W,
12. Connect any cables that should be attached to the card.
See the documentation for the card for information about the card's cable connections.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
13. Close the computer
14. If you installed a sound card:
a. Enter system
b. Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the
microphone, speaker/headphone, or line-in connectors on the back panel.
15. If you installed an add-in network adapter:
a. Enter system
b. Connect the network cable to the add-in network adapter's connectors. Do not connect the network cable to the
integrated connector on the back panel.
16. Install any drivers required for the card as described in the card documentation.
cover, reconnect the computer and devices to electrical outlets, and turn them on.
setup, select Audio Controller, and change the setting to Off.
setup, select Network Controller, and change the setting to Off.
install the card fan.