Page 1
SP420 Wallfire SP920 Wallfire 08/19222/2 - Issue 2 Products comply with the European Safety Standard: EN 60335-2-30 and the European Standards for Electromagetic Compatibility (EMC) EN55014-1 / A2: 2002 and EN55014-2:2003 which cover the essential requirements of EEC directives 73/23 and 89/336...
Page 2
SP420 SP920 1010 min. min. 300 min. 300 min. (600 recommended) (600 recommended) 1158...
Installation and Operating Instructions Dimplex Wall Fires Model(s): SP420 & SP920 IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE General features of remote control are: Important Safety Advice: • Activate/Deactivate heated glass panel. When using electrical appliances, basic precautions •...
4. When the structure is complete, remove the front panel of the fire by following the steps as outlined in ‘Lamp Lamp Replacement - SP420 Replacement’ sections and Fig.10 for SP4 and Fig. 12 for WARNING – ALWAYS DISCONNECT FROM THE POWER SP9.
Lamp Replacement – SP920 Cleaning WARNING – ALWAYS DISCONNECT FROM THE POWER WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE REMOVING LAMPS. SUPPLY BEFORE CLEANING THE HEATER. Warning - The lamps reach high temperatures during For general cleaning use a soft clean duster – never use operation.
Page 8
Hampshire. SO30 2DF Republic of Ireland Tel. 01 8424833 [c] Glen Dimplex UK Limited All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex UK Limited.
Need help?
Do you have a question about the SP420 and is the answer not in the manual?
Questions and answers