Page 1
SP1 Wallfire SP2 Wallfire SP3 Wallfire SP8 Wallfire 08/19217/7 (UK) Issue 7 The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC...
Page 2
min. 300 min. 300 min. min. 300 min. min. 300 min.
Dimplex Wall Fires Model(s): SP120, SP220, SP320 & SP820 IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE General features of remote control are: Important Safety Advice • Heat output can be increased or decreased according When using electrical appliances, basic precautions to your particular requirements.
The Standby switch must first be turned ‘ON’ to operate the Take care not to over-tighten the lamp. heater manually or by remote control. Steps for reassembling the heater Note: It takes some time for the receiver to respond to the 1.
Should you require after sales information or assistance with this product please go to www.dimplex.co.uk where you will find our self help guide by clicking on “After Sales” or ring our helpdesk on 0845 600 5111 (UK) or 01 842 4833 (R.O.I.) .
Page 8
Republic of Ireland Tel. 01 8424833 SO30 2DF [c] GDC Group Ltd, All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex. A division of GDC Group Ltd,...
Need help?
Do you have a question about the SP1 Wallfire and is the answer not in the manual?
Questions and answers