Attachment Of Auxiliary Equipment - Volkswagen Transporter T5 Manuallines

Auxiliary equipment should be attached to the frame using consoles, which are welded to the longitudinal member in the
neutral zone. If a bolted connection to the frame cannot be avoided, spacer sleeves should be welded into the hollow
profile members as a supplementary measure.
Observe:
General notes on modifications to series prouktion vehicles (see 5.5)
•
Drilling in chassis frame (see 4.6)
•
For custom parts attached to the exterior or interior, the auxiliary equipment manufacturer s regulations should be
observed.
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of up-to-date data on body guidelines (online body
guidelines). Data status August 2007
1