Load-Dependent Brake Pressure Limiter - Volkswagen Transporter T5 Manuallines

The load-dependent brake pressure limiter is set in the factory via a spring mechanism to the unladen weight of the
vehicle. This setting should not normally be adjusted, even following assembly of a custom body on the chassis.
In particular cases, e.g. retrofitting of heavy duty springs, unusually lightweight body construction, this setting of the brake
pressure limiter can be altered.
Pressure control and adjustment should be carried out by a Volkswagen commercial vehicle dealership.
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of up-to-date data on body guidelines (online body
guidelines). Data status August 2007
1