Call Details - Cisco C20 User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

Call Details

If you enable Auto Answer the system will respond by
itself to incoming calls after a delay specified by you.
Note that an activated auto answer may not provide
you with the privacy desired. In the example shown
here Auto Answer is set to Off.
On certain occasions you may have to change the
bandwidth (and hence the quality) of the call. Some
configurations may have different incoming and
outgoing bandwidths (typically ADSL connections),
and you may specify the default call rate to ensure a
stable video quality.
The default protocol may also be specified. In the
example shown, the protocol has been set to SIP.
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Settings > Administrator Settings > Call Details
This menu is inside the Administrator Settings.
Tap Back to leave the Administrator Settings
45
and tap Exit to leave all settings.
User guide
www.cisco.com