Ip Settings - Cisco C20 User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

IP Settings

You may specify whether to use IPv4 or IPv6 and
whether to use static IP address or DHCP.
When set to Static, applicable addresses must be set
accordingly.
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Settings > Administrator Settings > IP & VLAN
This menu is inside the Administrator Settings.
Tap Back to leave the Administrator Settings
48
and tap Exit to leave all settings.
User guide
www.cisco.com