Call Details - Cisco TelePresence EX60 User Manual

Cisco TelePresence System EX60 & EX90

Call Details

If you enable Auto Answer the system will respond by
itself to incoming calls after a delay specified by you.
Note that an activated auto answer may not provide
you with the privacy desired. In the example shown
here Auto Answer is set to Off.
On certain occasions you may have to change the
bandwidth (and hence the quality) of the call. Some
configurations may have different incoming and
outgoing bandwidths (typically ADSL connections),
and you may specify the default call rate to ensure a
stable video quality.
The default protocol may also be specified. In the
example shown, the protocol has been set to SIP.
D1501606 User guide EX60 & EX90, English
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.2, 07.2013
Settings > Administrator Settings > Call Details
This menu is inside the Administrator Settings.
Tap Back to leave the Administrator Settings
44
and tap Exit to leave all settings.
User guide
www.cisco.com