Installing and Wiring the Thermostat
Testing the Cool Controls
Press HVAC.
1
Press Mode. A menu list appears.
2
Use the Up and Down arrows on the right side of the panel to select Cool.
3
Press Select.
4
Press Back.
5
Continuously press the Down arrow until the cool set point is lower than the
6
temperature reading. The cool and fan relays should click and the HVAC system
should activate the cool and fan.
Testing the Fan Operation
Press HVAC.
1
Press Fan. A menu list appears.
2
Use the Up and Down arrows on the right side of the panel to select On.
3
Press Select. The fan relay should click and the fan should turn on.
4
12
Beta Draft Confidential
Proliphix Thermostat Installation Guide, Release 1.0
Part No. 600-01000-100