Control The Smart Card - Contex GX67D Operator's Manual

Installation 3-5

3.4 Control the Smart Card

Check that the Smart Card is correctly installed (contact side downwards) and corresponds to
your scanner model. The scanner will function correctly only with a Smart Card inserted.
Be sure that the scanner is turned off when removing/inserting a Smart Card or
accessing the Smart Card area.
Locating the Smart Card
On Scanners:
You will find the Smart Card in the small drawer labeled "PUSH" behind the scanner front
streamer (slide the streamer towards the left to access the drawer). Notice that the SCSI DIL
switch controls are in the Smart Card drawer. The DIL switches are used only for certain
configurations with SCSI interfacing (described in section Connection through SCSI interface).
Smart Card drawer behind the streamer
Locating the Smart Card
On Scanners:
On these models you access the Smart Card by lifting the scanning area lid towards the back.
The Smart Card is placed in its insertion slot on the top right side of the scanner.
Lift the scanning area lid to access the smart card