Lighting Submenu - Mercedes-Benz Sprinter Operator's Manual

On-board computer (vehicles with steering wheel buttons)
194
Selecting the time format
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings Settings
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Clock/Date Clock/Date
Press the 9 button to select the
X
12/24 h 12/24 h function.
The selection marker is on the current set-
ting.
Press the W or X button to select the
X
12 h 12 h or 24 h 24 h

Lighting submenu

Activating/deactivating Highbeam Assist
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings Settings
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Lighting Lighting submenu.
Press the 9 button to select the
X
beam Assist beam Assist
The selection marker is on the current set-
ting.
Use the W or X button to switch
X
Highbeam Assist
i
For safety reasons, it is not possible to
reset the Highbeam Assist Highbeam
factory settings during a journey. You will
see the following message in the display:
menu appears in the
submenu.
clock format.
menu appears in the
function.
On On or Off Off .
Assist function to the
Setting only possible at stand‐ Setting only possible at stand‐
still. still
For further information about Highbeam
Assist, see (
Switching the daytime running lamps on/
off
If you switch the daytime running lamps func-
tion to On On, the daytime running lamps will
automatically light up when the engine is run-
ning.
For safety reasons, it is only possible to
change this setting when the vehicle is sta-
tionary. The factory setting is
in which daytime running lamp mode or day-
time running lamps are mandatory.
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings Settings
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Lighting Lighting
Press the 9 button to select the
X
time runn. lamps time runn. lamps
The selection marker is on the current set-
ting.
Press the W or X button to switch
High‐ High‐ X
the daytime running lamps
i
If you turn the light switch to T or
L, the corresponding lamp switches on.
If you turn the light switch to Ã, the
daytime running lamps remain switched
on.
i
For safety reasons, it is not possible to
reset the
to the factory setting while the vehicle is in
page 97).
Y
On On
menu appears in the
submenu.
function.
On On or
Daytime runn. lamps Daytime runn. lamps
in countries
Day‐ Day‐
Off. Off
function