Warning And Indicator Lamps - Mercedes-Benz Sprinter Operator's Manual

Press the & or * button to select the
X
desired name.
Or
To start rapid scrolling: press and hold
X
the & or * button longer than 1 sec-
ond.
Rapid scrolling stops when you release the
button or reach the end of the list.
Using the steering wheel buttons
To start dialing: press the 6 button.
X
The on-board computer dials the corre-
sponding phone number.
When a connection is established, the
name of the other person and/or the call
duration appear in the display.
To exit the telephone book: press the
X
~ button.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
Using the steering wheel buttons
Use the V or U buttons to select the
X
TEL TEL menu.
The display shows the mobile phone opera-
tional readiness symbol.
Press the 6 button.
X
The display shows the most recently dialed
numbers or names in the redial memory.
Press the & or * button to select the
X
desired name or number.
To start dialing: press the 6 button.
X
The on-board computer dials the corre-
sponding phone number.
When a connection is established, the
name of the other person and/or the call
duration appear in the display.
Or
To exit the redial memory: press the
X
~ button.
Display messages
Display messages
Notes on display messages
Important safety notes
G
WARNING
No information will be displayed if either the
instrument cluster or the display is inopera-
tive.
As a result, you will not be able to see warning
and indicator lamps or information about the
driving conditions, such as speed or outside
temperature. Driving characteristics may be
impaired. Adjust your driving style and vehicle
speed accordingly.
Contact a qualified specialist workshop
immediately.
G
WARNING
If service work is not carried out correctly, the
operating safety of your vehicle may be
affected. This could cause you to lose control
of your vehicle and cause an accident. More-
over, the safety systems may no longer be
able to protect you or others as they are
designed to do.
Always have service work carried out at a
qualified specialist workshop.
i
If you turn the key to position 2 in the
ignition, a display check is performed. All
warning/indicator lamps (except the turn
signal indicator lamps) and the display are
activated. Before starting the journey,
check that the warning and indicator lamps
are operating correctly.
Vehicles without steering wheel but-
tons
Warnings, malfunctions or additional infor-
mation may also be shown in the display. The
following tables show all the display mes-
sages. A warning tone sounds with certain
display messages.
199
Z