Mercedes-Benz Sprinter Operator's Manual page 193

On-board computer (vehicles with steering wheel buttons)
When the Settings Settings message is displayed,
you can reset all functions of the submenu to
the factory settings.
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings Settings
display.
Press and hold the 9 reset button for
X
approximately 3 seconds.
You will see a message in the display
prompting you to press the 9 reset button
again to confirm.
Press the 9 reset button again.
X
The functions in all submenus are reset to
the factory settings.
i
If you want to retain the settings, do not
press the 9 reset button a second time.
The Settings Settings menu appears again after
approximately 5 seconds.
Resetting the functions of a submenu
You can individually reset the functions of
each submenu to the factory settings.
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings Settings
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select a
X
submenu.
Press and hold the 9 reset button for
X
approximately 3 seconds.
You will see a message in the display
prompting you to press the 9 reset button
again to confirm.
Press the 9 reset button again.
X
All functions in the submenu are reset to
the factory settings.
i
If you want to retain the settings, do not
press the 9 reset button a second time.
menu appears in the
menu appears in the
The Settings Settings menu appears again after
approximately 5 seconds.
Selecting submenus
You will see the collection of submenus.
There are more submenus than can be dis-
played at the same time.
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the Settings Settings
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select a
X
submenu.
The submenu currently selected is high-
lighted.
Press the 9 button to select the func-
X
tion within a submenu.
Change the setting by pressing the W or
X
X button.
The changed setting is saved.
Instrument cluster submenu
Selecting the unit for temperature
menu appears in the
Z
191