Operating The Vcr - JVC TH-S55 Instructions Manual

Operating external components with the remote control

Operating the VCR

7 To set the manufacturer's code
You can operate a JVC VCR without setting the manufacturer's
code.
1
Slide the remote control mode selector
to VCR.
2
Press and hold
Keep the button pressed until step 4 is finished.
3
Press ENTER.
4
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Panasonic VCR:
Press 2, then 1.
For a Philips VCR:
Press 0, then 5.
Manufac-
Code
turer
JVC 01
Aiwa 02, 20
Bell+Howell 03, 16
Blaupunkt 04
CGM 03, 05, 16
Daewoo 34
Digtal 05
Fisher 03, 16
G.E. 06
Grundig 07
Hitachi 08, 09
Loewe 05, 10, 11
Magnavox 04, 05
Mitsubishi 12 – 15
5
Release VCR.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
15
VCR.
Manufac-
Code
turer
Nokia 16
Nordmende 17 – 19, 31
Orion 20
Panasonic 21
Philips 05, 22
Phonola 05
Saba 17 – 19, 23, 31
Samsung 24, 25
Sanyo 03, 16
Sharp 26, 27
Siemens 07
Sony 28 – 30, 35
Telefunken 17 – 19, 31, 32
Toshiba 33
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a VCR;
Set the remote control mode selector to VCR.
The following buttons are available:
VCR: Turns VCR on and off.
3 (play button): Starts playback.
7 :
Stops operation.
8 :
Pauses playback.
y:
Fast forwards video tape.
1: Rewinds video tape.
REC: Press this button together with 3 (play button) to
start recording or together with 8 to pause
recording.
CHANNEL +/–: Changes the TV channels on the VCR.
See page 14 for button locations.