Operating The Vcr - JVC TH-C20C Instructions Manual

Operating external components with the remote control
5
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product:
Press 0, then 1.
For a Sony product:
Press 2, then 0.
Manufacturer
Echostar
GI Jerrold
Hamlin
Pioneer
RCA
Scientific Atlanta
Sony
Zenith
* "01" is the initial setting.
6
Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector
to VCR/DBS.
2 Press DBS.
The following buttons are available:
F VCR/DBS: Turns DBS tuner or CATV converter on and
off.
CH +/–: Changes the channels.
1-10, 0, h10 (100+): Selects the channel.

Operating the VCR

7 To set the manufacturer's code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold F VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
13
Code
21
01*, 02, 03, 04, 05, 06, 07, 08
15, 16, 17, 18
13, 14
19
09, 10
20
11, 12
See page 12 for button locations.
5
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Philips VCR:
Press 0, then 9.
For an NEC VCR:
Press 2, then 5.
Manufacturer Code
JVC 01*, 02, 03
Emerson 11, 26
Fisher 29
Funai 10, 14, 15, 16
Gold Star 12
Hitachi 04
Mitsubishi 13
NEC 25
Panasonic 07, 17
* "01" is the initial setting.
6
Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector
to VCR/DBS.
2 Press VCR.
The following buttons are available:
F VCR/DBS: Turns VCR on and off.
3 (play button): Starts playback.
7: Stops operation.
8: Pauses playback.
y: Fast forwards video tape.
1: Rewinds video tape.
REC: Press this button together with 3 (play
button) to start recording or together with 8
to pause recording.
CH +/–: Changes the TV channels on the VCR.
NOTE
• When operating a VCR or DBS tuner/CATV converter;
• The source setting of VCR or DBS remains after you have changed the
remote control mode selector to AUDIO or TV. When operating VCR
or DBS tuner/CATV converter again, it is not necessary to press VCR
or DBS after setting the remote control mode selector.
Manufacturer Code
Philips 09
RCA 05, 06
Samsung 24
Sanyo 21, 22, 23
Sharp 27, 28
Shintom 30
Sony 18, 19, 20
Zenith 08