Operating The Vcr; Operating The Dbs Tuner Or Catv Converter - JVC TH-S77 Instructions Manual

Operating external components with the remote control

Operating the VCR

7 To set the manufacturer's code
You can operate a JVC VCR without setting the manufacturer's
code.
1
Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Panasonic VCR:
Press 0, then 7.
For a NEC VCR:
Press 2, then 5.
Manufacturer Code
JVC 01, 02, 03
Emerson 11, 26
Fisher 29
Funai 10, 14, 15, 16
Gold Star 12
Hitachi 04
Mitsubishi 13
NEC 25
Panasonic 07, 17
6
Release VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a
VCR;
Set the remote control mode selector to
VCR/DBS.
The following buttons are available:
VCR/DBS: Turns VCR on and off.
3 (play button): Starts playback.
7 : Stops operation.
8 : Pauses playback.
Fast forwards video tape.
y:
Rewinds video tape.
1:
Press this button together with 3 (play button) to
REC:
start recording or together with 8 to pause
recording.
CHANNEL +/–: Changes the TV channels on the VCR.
13
VCR/DBS.
Manufacturer Code
Philips 09
RCA 05, 06
Samsung 24
Sanyo 21, 22, 23
Sharp 27, 28
Shintom 30
Sony 18, 19, 20
Zenith 08
Operating the DBS tuner
or CATV converter
7 To set the manufacturer's code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press DBS.
3
Press and hold
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product:
Press 0, then 1.
For a Sony product:
Press 2, then 0.
Manufacturer
Echostar
GI Jerrold
Hamlin
Pioneer
RCA
Scientific Atlanta
Sony
Zenith
6
Release VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector to
VCR/DBS.
2 Press DBS.
The following buttons are available:
Turns DBS tuner or CATV converter on and
VCR/DBS:
off.
Changes the channels.
CHANNEL +/–:
1-10, 0, +10 (100+): Selects the channel.
NOTE
When operating a VCR or DBS tuner/CATV converter;
• The source setting of VCR or DBS D remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to press
VCR or DBS after setting the remote control mode selector.
See page 12 for button locations.
VCR/DBS.
Code
21
01, 02, 03, 04, 05, 06, 07, 08
15, 16, 17, 18
13, 14
19
09, 10
20
11, 12