To Install And Connect The Retrofit Cable - BMW 1 Series Installation Instructions Manual

8.

To install and connect the retrofit cable

A
X13812
A2
A3-A5
© BMW AG, Munich
A10
1
090 1057 Z
A10
1
060 1084 Z
A10
060 1085 Z
X13813
E
1
060 1086 Z
01 29 0 420 167
E87, E90 and E92 cars only
Attach branch A10, black 18-pin plug casing, of retrofit
cable A to the standard wiring harness (1) behind the rear
seat backrest to the left using cable tie G.
E91, E60, E61 and E63, E64 cars only
Attach branch A10, black 18-pin plug casing, of the
retrofit cable A to the standard wiring harness (1) in the
luggage compartment on the left using cable tie G.
All cars
Route all branches except branch A10 of the retrofit
cable A along the standard wiring harness into the
footwell on the driver's side.
Cars with AUX jack only
Route branches A2-A5 to radio connector X13812.
Disconnect the AUX cable (1) from plug X13813, black
12-pin plug and connect them to black 3-pin socket
casing E as follows:
- White/red or yellow cable from PIN 7 in PIN 1
- White/blue or black cable from PIN 2, in PIN 2
- White/brown or transparent cable from PIN 8 in PIN 3
Connect socket casing E to branch A2, black 3-pin plug
casing.
8/2006 (Z/Z) 12