To Install The Acm Unit And Universal Can Interface For E90, E91 And E92 Cars - BMW 1 Series Installation Instructions Manual

13. To install the ACM unit and universal CAN interface for E90, E91 and E92 cars

C
B1
C
B1
A15
1
D
© BMW AG, Munich
I
1
2
A15
090 1040 Z
I
1
2
090 1041 Z
F C
090 1042 Z
I
090 1073 Z
01 29 0 420 167
For cars with M-ASK only
Use the coding (1) on the plugs to connect them
correctly.
Connect plugs to ACM unit C as follows:
- Plug (2) on the existing signal cable (white 10-pin)
- Branch A15 (black 26-pin socket casing)
- Branch B1 (violet 10-pin plug)
Stick sealing strip I to ACM unit C.
Cars with CCC only
Remove coding (1) from plug (2) on the existing signal
cable (blue 10-pin).
Connect plugs to ACM unit C as shown:
- Plug (2) on the existing signal cable (blue 10-pin)
- Branch A15 (black 26-pin socket casing)
- Branch B1 (violet 10-pin plug)
Stick sealing strip I to ACM unit C.
All cars
Secure ACM unit C to the rear of the heating duct (1)
using cable ties F.
Ensure that the steering column can still move freely
as required.
Affix the sealing strip I to universal CAN interface D.
8/2006 (Z/Z) 21