BMW 1 Series Installation Instructions Manual page 24

14. To install the ACM unit and universal CAN interface for E60, E61 and E63, E64 cars
A1
D
F
© BMW AG, Munich
A16
1
060 1103 Z
01 29 0 420 167
In countries in which image reproduction is
permitted up to a particular speed, the red cable
from PIN 2 must be disconnected at branch A1, insulated
and tied back.
Ensure that the steering column can still move freely as
required.
Secure universal CAN interface D to the trim (1) below
the steering column using cable ties F.
Connect branch A1, black 32-pin socket casing, to
universal CAN interface D.
Tie back branch A16, black 18-pin plug casing, at a
suitable location.
Tie back any excess cable to the standard wiring harness.
8/2006 (Z/Z) 24