Concluding Work And Coding - BMW 1 Series Installation Instructions Manual

15. Concluding work and coding

Cars without auxiliary connection only
This retrofit system requires coding
- Connect the battery
- Conduct a brief test
- Encode/program the retrofit with SSS (software service station) via the CIP, retrofit aux-in connection path
Cars with auxiliary connection only
This retrofit system does not require coding.
- Connect the battery
- Conduct a brief test
Perform settings in the Service Menu
The systems installed in the car must be selected in the Service Menu.
Systems that are not selected are skipped during scrolling or are not visible to the customer.
In order to call up the Service Menu:
- Press and hold the "Menu" button to bring up the accessory menu
- Move the controller to the right once
- Move the controller 3 times to the left
- Press the controller once
The Service Menu is displayed on the control display.
By turning and pressing the controller, you can now select or disable systems that have or have not been installed.
Selected and non-selectable systems are shown in black.
Selectable systems are shown in white.
- Exit the Service Menu
- Conduct a function test
- Re-assemble the car
© BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z) 25