Intercom; Conference; Transfer - Allworx 9212 Phone Manual

Hide thumbs Also See for 9212:
Table of Contents

Advertisement

4.2 Intercom

1. Press the INTERCOM button and dial the extension of the person you would like to talk to.
2. The call is connected when the LCD screen displays Active Call.
3. Start talking. The person you called will hear you over their speaker.
4. Press the INTERCOM or SPEAKER button to end the call.
5. To deny an incoming Intercom request, press the IGNORE soft key.

4.3 Conference

After connecting to the first person you want on the conference call, follow these steps:
1. Press the CONF button.
2. Select another Call Appearance PFK and dial the number of the second person you want on the
conference call.
3. Press the CONF button.
4. Press the Call Appearance PFK where the first person is on hold.
5. All three callers are now able to conference. The CONF button will be illuminated solid red.
6. One party may exit the conference by hanging up; the remaining two parties will continue to be
connected.
7. If you desire to have a private conversation with one of the parties, you may split the conference using
the following steps:
a. Use the Up / Down navigation arrows, to select the Call Appearance PFK of the person you
wish to put on hold and then press the HOLD button. (The display will show the two parties
involved in the conference).
b. You may now talk to the remaining party.
c. The Call Appearance PFK for the person on hold will be flashing. To have the person re-join the
conference, press CONF, then select the flashing Call Appearance PFK. The three-way
conference is then re-established.
8. End the conference by hanging up.

4.4 Transfer

Unannounced (Blind) Transfer
1. Press the TRANSFER button. The current call is placed on hold.
2. At the dial tone, dial the extension to where you want to transfer the call.
3. The call will automatically be transferred. If the recipient does not answer, the call will follow the
recipient's call route.
Announced (Attended) Transfer
To talk to the person to whom you are transferring the call to before the transfer goes through.
1. Press the TRANSFER button.
2. Select a second Call Appearance PFK.
3. Dial the extension to where you want to transfer the call.
4. Talk to the new recipient.
5. Press the TRANSFER button again. The two parties will now be connected.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2011 Allworx Corp. All rights reserved. All other names may be trademarks or registered trademarks of their respective owners.
Phone Guide – 9212/9212L
Revised: December 1, 2011
Page 6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9212l

Table of Contents