Page 1
OPERATOR’S MANUAL Variable Speed Multi Tool Kit Item # 2312 IMPORTANT: ® You new WEN tool/equipment has been engineered and manufactured to high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
GENERAL SAFETY RULES WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b.
Page 5
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
SPECIFIC SAFETY WARNINGS 1. Maintain labels and nameplates on the power tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. CAUTION: Avoid accidental injury. Keep hands and fingers safely away from the oscillating Angled Scraper (4), Blades (501, 503), and Sanding Pad (502) when operating the Tool.
VIBRATION SAFETY This power tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating power tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use.
ELECTRICAL INFORMATION WARNING: This drill press is for indoor use only. Do not expose to rain or use in damp locations. Guidelines for using extension cords Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw.
ASSEMBLY Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call our customer service at 1-800-232-1195. Assembly Instructions Warning: To Prevent Serious Injury From Accidental Operation: Turn the power switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
OPERATION Work Piece and Work Area Set Up 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent injury and distraction. 2. Route the Power Cord along a safe route to reach the work area without creating a tripping hazard or exposing the Power Cord to possible damage.
MAINTENANCE Procedures not specifically explained in this manual must be performed only by a qualified technician. Warning: To Prevent Serious Injury From Accidental Operation: Turn the power switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
TROUBLESHOOTING Problem Causes Solutions Tool will not start. Power cord not connected. Check that power cord is plugged in. No power at outlet. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. Internal damaged or wear. Have technician service tool.
WARRANTY STATEMENT LIMITED ONE YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC ("Seller") warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of one (1) year from date of purchase.