Know your power tool. Read the operator’s manual carefully. Learn Know your power tool. Read the operator’s manual carefully. Learn the application and limitations as well as specific potential hazards the application and limitations as well as specific potential hazards related to this tool.
Page 5
Wear proper apparel. Do not wear loose clothing, neckties, or jewelry Wear proper apparel. Do not wear loose clothing, neckties, or jewelry that can get caught in the tool’s moving parts and cause personal that can get caught in the tool’s moving parts and cause personal injury.
Page 6
that it will operate properly and perform its intended function. Check that it will operate properly and perform its intended function. Check for alignment of moving parts, binding or moving parts, breakage of for alignment of moving parts, binding or moving parts, breakage of parts, mounting and any other conditions that may affect its parts, mounting and any other conditions that may affect its operation.
Page 7
Never use in an explosive atmosphere. Normal sparking of the motor Never use in an explosive atmosphere. Normal sparking of the motor could ignite fumes. could ignite fumes. Use only outdoor extension cords with approved ground connection Use only outdoor extension cords with approved ground connection that are intended for use outdoors and so marked.
Page 8
Before changing the setup, removing covers, guards or blades, unplug Before changing the setup, removing covers, guards or blades, unplug the tool and remove the switch key. the tool and remove the switch key. Always turn off tool before disconnecting it to avoid accidental Always turn off tool before disconnecting it to avoid accidental starting when reconnecting to a power source.
® ® ° ° ° ° Securely insert the plug of the Heat Gun into the AC 120V 60Hz Securely insert the plug of the Heat Gun into the AC 120V 60Hz receptacle. receptacle. The Heat Gun starts working when the switch is pushed upward to The Heat Gun starts working when the switch is pushed upward to position “Π”...
Need help?
Do you have a question about the 2010 and is the answer not in the manual?
Questions and answers