Optical Drive; Loading A Disc; Playing Back And Retrieving Data From Discs - Medion MD8825 User Manual

Optical Drive

Diagram reference: A

Loading a Disc:

Attention!
Do not place protective foils or other stickers on your CD's. To avoid
damage to your drive, do not use deformed or damaged CD's. Do not
use scratched or dirty discs, discs with pieces broken off or discs of
poor quality. Because of the high speeds in the drive the discs might
break and damage your data as well as your drive. Examine the discs
before you enter them. If damage or dirt is visible, you should not use
them.
Damage caused by faulty media is excluded from warranty and any
repair will be charged.
1. Push the eject button (Diagram reference, B) on the right of the optical drive
to open the tray.
2. Place the disc on the tray so that it lays flat with the label facing upward.
3. Push the eject button again to close the tray.
Note
Many CD's start automatically when they are inserted. This depends
on the operating system and the corresponding settings.

Playing Back and Retrieving Data from Discs

Your PC is able to playback and retrieve audio CDs, DVD movies and data discs.
After loading the disc, your operating system will open a selection window with dif-
ferent options for playback.
If your operating system doesn't open the selection window you can access via the
Explorer or PC.
- 27 -