Yamaha XS850G Owner's Manual page 53

1. Rubbercap
3. Keep the valve open while pressing it
for several seconds so that the air can
be let out of the inner tube.
1. Push
4. The spring seat and fork spring are re-
tained by a stopper ring (spring wire
circlip). It is necessary to depress the
spring seat and fork spring to remove
the stopper ring. Remove the stopper
ring by carefully prying out one end with
a small screwdriver.
5.
Place an open container under each
drain hole. Remove the drain screw
from each outer tube.
- W A R N I N G :
Do not allow oil to contact the disc
brake components. If any oil should
contact the brake components it must
be removed before the motorcycle is op-
erated. Oil will cause diminished brak-
ing capacity and will damage the rubber
components of the brake assembly.
-52-