g. Add oil through the oil filler hole.
With oil filter replacement:
Recommended oil: See page 17.
h
After replacement of engine oil, and/or
oil filter, be sure to check the oil pres-
sure and for any oil leakage. The oil pre-
ssure indicator light should go off after
the engine is started.
Middle gear/Final gear oil
1.
Oil level measurement
a.
Place the motorcycle on a level place
and place it on the center stand. The
engine should be cool (at atmospheric
temperature).
b
Remove the oil filler cap. Check the oil
level with level gauge (from tool kit) as
shown. The correct oil level is between
the two marks on each end of the level
gauge. Use the tool end marked "REAR"
for measuring the rear (final) gear case.
Use the end marked "MIDDLE" for
measuring the middle gear case.