Ports; Front Panel Components - D-Link DGS-3000-10TC Hardware Installation Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide
RFC 2575 VACM for SNMP MIB
o
RFC 2576 SNMPv1, v2 & v3 MIB
o
RFC 2665 Ether-like MIB
o
RFC 4363 P-Bridge MIB and Q-Bridge MIB
o
RFC 2863 IF MIB
o
RFC 2618 RADIUS Authentication Client MIB
o
RFC 2620 RADIUS Accounting Client MIB
o
RFC 2925 Ping and Traceroute MIB
o
Private MIB
o
RFC 4293 IPv6 MIB
o
RFC 4022 TCP MIB
o
LLDP MIB
o
LLDP-DOT1-MIB, LLDP-DOT3-MIB
o
•
Provides parallel LED display for port status such as link/act, speed, etc.
•
Web-based GUI compatible with most major browsers, including Internet Explorer (version 5.5 and later), Mozilla
Firefox (version 2.0 and later), Safari (version 4.0 and later), and Google Chrome (version 6.0 and later).

Ports

DGS-3000-10TC
DGS-3000-24TC
DGS-3000-26TC
•
All the switches are equipt with one RJ-45 Console port (a special console cable with a DB9 interface is provided
to connect the Switch to a PC)
NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP management
software, go to

Front Panel Components

The front panel of the Switch consists of LED indicators for Power, Console, RPS, Fan Err, and for Link/Act for each
port on the Switch including SFP port LEDs. DGS-3000-26TC has an alarm port at the front panel.
Eight Copper ports (10/100/1000Mbps).
Two Combo Copper/SFP ports (10/100/1000Mbps and 100/1000Mbps).
Twenty Copper ports (10/100/1000Mbps).
Four Combo Copper/SFP ports (10/100/1000Mbps and 100/1000Mbps).
Twenty Copper ports (10/100/1000Mbps).
Four Combo Copper/SFP ports (10/100/1000Mbps and 100/1000Mbps).
Two SFP+ ports (1000Mbps/10Gbps).
http://dview.dlink.com.tw/
Figure 1-1 Front panel view of the DGS-3000-10TC
and download the software and manual.
3