Configuring Lan Ports For Iptv/Voip - D-Link DIR-300 Quick Installation Manual

DIR-300

Configuring LAN Ports for IPTV/VoIP

This configuration step is available for the Router and WISP Repeater
modes.
1. On the IPTV page, select the Is an STB connected to the device
checkbox.
2. Select a free LAN port for connecting your set-top box.
3. If the IPTV service is provided via a VLAN channel, select the Use
VLAN ID checkbox and fill in the VLAN ID field.
4. Click the NEXT button.
5. On the VoIP page, select the Is an IP phone connected to the
device checkbox.
6. Select a free LAN port for connecting your IP phone.
7. If the VoIP service is provided via a VLAN channel, select the Use
VLAN ID checkbox and fill in the VLAN ID field.
8. Click the NEXT button.
Quick Installation Guide
28