Table of Contents
Advertisement
Installing controllers
8.1
Installing controllers
Ê Open the server as described in the chapter "Preparation" on page 15f.
Removing the riser card holder
Figure 22: Removing the riser card holder
Ê Undo the two knurled screws (see figure).
Ê Pull out the riser card holder upwards.
Installing a PCI board
Ê Please read the documentation supplied with the PCI board.
Ê Plug any necessary cables into the PCI board.
Ê Remove the slot cover from the PCI board.
I
Keep the slot cover for future use. If you remove the board without
installing a new one, you must reinstall the slot cover to comply with
EMC regulations (regulations on electromagnetic compatibility) and
to satisfy cooling requirements and fire protection measures.
40
Controllers in Non-Hot-Plug PCI Slots
Options Guide
Advertisement
Table of Contents
