Fujitsu Siemens Computers Primergy RX200 S2 Options Manual page 24

Opening the server
In the majority of cases it makes sense to remove the server from the rack.
V
CAUTION!
There is no cable management for the server in the rack!
Before you remove the server from the rack, you must therefore
unplug all cables connected to the server from their sockets.
I
How to remove the server from the rack is described in the operating
manual.
Figure 3: Removing the cover
Ê Undo the knurled screw on the back of the device (see figure).
Ê Pull the server cover back a few centimeters.
Ê Lift up the server cover and remove it.
16 Options Guide
Preparation