Clearances; Mantel & Trim; Alcove - Jøtul GF 100 DV Nordic QT Installation And Operation Instructions Manual

Stove and Vent Clearance
Requirements
Minimum Clearances from the Stove to Combustibles:
See figs. 2-4.
Rear: 0" (0 mm)
Ceiling: 25" (635 mm)
Corner: 2" (50 mm)
Right Side: 3" (76 mm)
Left Side: 10" (254 mm)
Minimum Clearances from the Vent Pipe to Combus-
tibles:
Horizontal Run:
Off the top of the pipe
Off the sides and bottom
Vertical Run:
All sides 1" (25 mm)
24"or greater
Mantel Depth or Ceiling
12" or less
25"
635 mm
16"
406 mm
9"
229
mm
Figure 2. Mantel and Trim Clearance
specifications.
- for access to Lighting Instruction plate
2" (50 mm)
1" (25 mm)
6" or less
4"or less
1" deep trim
must be 4"
(102 mm)
off the top
6"
of the stove.
152 mm
CLEARANCE TO REAR WALL IS= (0") ZERO CLEARANCE
10" *
(250 mm)
Left Side
* Allow 10" on left side of the appliance for complete
access to the lighting instructions and control valve.
Figure 3. Parallel Installation Clearances.
2"
50 mm
Figure 4. Corner Clearances.
Alcove Installation
Maximum Alcove Depth: 24" (610 mm)
Minimum Alcove Width: 34" (864 mm)
Minimum Ceiling Height: 47" (1094 mm)
3"
(80 mm)
Right Side
2"
50 mm
7