Appliance Front - Miele DG 6500 Operating And Installation Instructions

Appliance front

Remove soiling on the appliance front right away. If soiling
is left on, it may be impossible to remove and the surfaces
can discolor or change.
Glass cleaners may be used to clean the exterior. However
do not allow them to sit or "puddle", this can cause damage
to the surface. Remove the cleaner promptly.
Clean the appliance front with a clean sponge, dishwashing
liquid and warm water. Then wipe them dry with a soft cloth.
You can also use a clean, damp microfiber cloth without
detergent.
All surfaces are susceptible to scratches. Scratches on
glass surfaces could even cause a breakage.
All surfaces may become discolored or change, when
they come into contact with unsuitable cleaning materials.
To better maintain your appliance avoid the following:
– cleaning agents containing soda, ammonia, alkaline, acid
or chloride,
– limescale removers,
– abrasive cleaning agents, e.g. powder or cream cleansers,
pumice stone,
– cleaners containing solvents,
– stainless steel cleaners,
– dishwasher detergent,
– oven cleaners,
– glass cleaners,
– abrasive hard sponges and brushes, such as pot
scrubbers,
– magic erasers,
– sharp metal scrapers.
Cleaning and care
81