Using The Fm Radio - Goodmans GMN02BT User Manual

04

Using the FM Radio

To use the FM radio, press the FM
button on the remote control.
Aerial
Before using the FM radio, you must
first extend the aerial (a vertical
position is recommended). This ensures
that the maximum signal strength is
available when the radio begins to scan.
Extending the aerial also ensures the
best possible sound quality.
Scanning for Radio Stations
Automatic Scanning
Press the SEARCH button. The Mini
Stereo System begins searching for
radio stations. Any radio stations are
saved automatically.
To stop an automatic search, press the
SEARCH button again.
Manual Search
Press and hold the TU+ or TU- buttons
to search up or down the frequency
range. Once a radio station with
sufficient reception has been found the
scan will stop. You can then save the
radio station or start a new search.
Direct Entry
If you know the frequency of the radio
station you want, you can press the T/F
button then use the number buttons to
select a frequency in the format nnn.nn.
For example, for FM 109.70 press the 1,
then the 9, then the 7 and finally the 0.
When you enter frequencies above 100,
pressing 1 displays as 10 (i.e. the zero
is defaulted in).
10 10
Saving Radio Stations to
Memory
There are 60 available memory slots in
your Mini Stereo System.
When you have located a radio station
you can press the SAVE button to save
it into the next empty memory slot.
If you want to assign a station to a
particular memory slot:
Use the number buttons or the
CH+/CH- buttons to select the
required memory slot.
Press the T/F button then use
the number buttons to select the
required frequency.
Press the SAVE button to save it.
Selecting Saved Radio Stations
Use the number buttons or the CH+/
CH- buttons on the remote control to
select the memory slot containing the
frequency for the required radio station.