Daily Use - Goodmans GMN02BT User Manual

Daily use

Switching ON
To switch the Mini Stereo System
on, set the POWER switch on the
back of the base unit to ON.
To switch from Standby, press the
button on the remote control (or
the one on the front of the stereo).
To switch to Standby, press the
button on the remote control (or
the one on the front of the stereo).
To switch the Mini Stereo System
off, set the POWER switch on the
back of the base unit to OFF.
Select Mode
When you switch from standby, the
Mini Stereo System remembers the
mode it was in last time it was used.
To change modes press the following
button on the remote control:
• CD - to enter CD mode.
• FM - to enter radio mode.
• BT - to connect to an external
device using Bluetooth.
• AUX - to connect to an external
device using the AUX IN
ports.
• USB - to enter USB mode (if you
have a USB device
connected).
P.LED
Press the P.LED button on the remote
control to switch the LED light on the
front panel of the Mini Stereo System
on or off.
Inserting a CD
Press the button on the remote
control (or the one on the front of
the stereo).
Insert a CD in the CD tray with the
CD label facing up.
Press the button or the
button on the remote control (or the
one on the front of the stereo) again.
The CD will automatically begin playing
at track 1.
Play/Pause
While playing a track, press the
button to pause the playback.
Press the button again, or press the
ENTER button, to resume the playback.
Adjusting the volume
To increase the volume, rotate the
VOLUME DIAL on the front of
the Mini Stereo System clockwise
or press the VOL+ button on the
remote control.
To decrease the volume, rotate the
VOLUME DIAL on the front of the
Mini Stereo System anticlockwise or
press the VOL- button on the remote
control.
You can also press the
the remote control to mute the volume.
Press the button again or use the
volume dial or buttons to resume the
previous volume level.
03
button on
7