Theory of operation Ver. 2.0 May 2008
B. Gate /Up
• The gate /Up switches the paper path of the paper that was conveyed to the upper con-
veyance path by the gate /Lw.
• The gate /Up is set to the paper path to the exit side when the gate solenoid /Up (SD2)
turns OFF.
• The gate /Up is set to the paper path to the 1st folding stopper when gate solenoid /Up
turns ON.
<Gate solenoid /Up : OFF>
Gate solenoid /Up (SD2)
Conveyance path to the exit side
C. Operation timing
(1) Z-folding mode
1. In the Z-folding mode for the all paper size, the gate solenoid /Lw (SD1) and the
gate solenoid /Up (SD2) turn ON when the paper size detect board (PSDTB)
detects the leading edge of the paper.
2. The gate /Lw is set to the upper conveyance path and the gate /Up is set to the
conveyance path to the 1st folding stopper.
3. The gate solenoid /Lw and the gate solenoid /Up turn OFF a specified period of
time after the last paper turns OFF the exit sensor (PS9).
Leading edge of the paper detected
by the paper size detect board
Paper size detect board (PSDTB)
Exit sensor (PS9)
Gate solenoid /Lw (SD1)
Gate solenoid /Up (SD2)
<Gate solenoid /Up : ON>
1st folding stopper
Gate /Up
Conveyance path to the 1st folding stopper
Gate solenoid /Lw (SD1) and gate
solenoid /Up (SD2) turned OFF
4. Conveyance section
A07TT2C006AA
A07TT2E035AA
13