Konica Minolta bizhub c650 Service Manual page 130

Theory of Operation Ver. 8.0 Jun. 2008
15.3.4 Waste Toner Near-Full/Full detection control
A. Waste toner near-full detection control
• An optical sensor is used to detect waste toner. When the sensor is blocked for a given
period of time, the machine determines that the Waste Toner box is nearly full of waste
toner.
• At this time, a corresponding warning (near-full warning) is given on the control panel.
B. Waste toner full detection control
• Upon the waste toner near full detection, the counter exclusive for waste toner inside the
machine starts counting. When the number of color pages reaches around 3,000 sheets
(A4) or the number of monochrome pages reaches around 12,000 sheets (A4), the
machine detects a waste toner full condition and stops printing.
• Counting method of the counter exclusive for the waste toner is corrected to count the
value appropriately according to the color or monochrome mode or paper length.
• When the waste toner full counter reads 12,000, the machine regards that the waste
toner box is full.
2 • C650/C550
Paper length in the sub scanning direction
216 mm or less
Over 216 mm and up to 432 mm
Over 432 mm
• C451
Paper length in the sub scanning direction
216 mm or less
Over 216 mm and up to 432 mm
Over 432 mm and up to 648 mm
Over 648 mm and up to 864 mm
Over 864 mm and up to 1080 mm
Over 1080 mm
15. Toner collecting section
Print mode Count
Color 4
Monochrome 1
Color 8
Monochrome 2
Color 12
Monochrome 3
Print mode Count
Color 4
Monochrome 1
Color 8
Monochrome 2
Color 12
Monochrome 3
Color 16
Monochrome 4
Color 20
Monochrome 5
Color 24
Monochrome 6
95
2