Installation Procedure - Beam DriveDOCKExtreme Installation & User Manual

WARNING:
Do not connect the DriveDOCK Extreme interface power cable
to power the unit until the full installation is completed.

Installation Procedure

Installing the DriveDOCK Extreme Cradle
Install the components in the following order. More detailed instructions
can be found in the sections following.
1. Mount the DriveDOCK Extreme cradle
2. a) Install the external Iridium Antenna Connection and/or
b) Install the GPS Antenna Connection (optional)
3. Connect the speaker and microphone
4. Install the external alert button (optional)
5. Connect the privacy handset (ordered as extra option)
6. Connect the Intelligent handset (ordered as extra option)
7. Connect the DC power cable to the DriveDOCK Extreme
8. Con gure Horn Output / Audio system Mute (optional)
9. Con gure Bluetooth® (optional)
10. Con gure Tracking / Alert (optional)
When selecting a location for the DriveDOCK Extreme, consider these
guidelines:
• Ensure the mounting surface is strong enough to support the cradle.
• Allow enough room so that you can easily insert the Extreme
handset into and remove it from the cradle.
• Ensure that the DriveDOCK Extreme is within cable distance of
power and antenna connections
• Position the handset and cables so that it does not interfere with
the vehicles operation or the occupants (driver or passenger) leg
space or seating position.
• Ensure su cient room is allowed for the antenna and interface
cables to be routed from the rear of the DriveDOCK Extreme.
20