Beam DriveDOCKExtreme Installation & User Manual page 51

To connect a PC/laptop to the DriveDOCK Extreme bottom mini-USB port,
you will require a mini-USB-B to USB-A data cable. This cable is included in
your original Extreme package.
USB Driver Installation
The DriveDOCK Extreme USB data port requires an interface driver to be
installed on the user's computer prior to undertaking data communication.
This driver supports the following operating systems:
Windows XP (SP3 or above) & Windows Vista, 7
You can download the Windows driver for the DriveDOCK Extreme from
http://www.beamcommunications.com/support
Please note that Iridium only supplies Direct Internet 3 software for the
Microsoft Windows-based operating system.
After the driver is successfully installed, two new serial ports should appear
in the Ports (COM & LPT) section of the Windows Device Manager as shown
below. Please use the USB Data port for data communication. The USB
Application port is used for DriveDOCK Extreme con guration via the Eagle.
51