Beam DriveDOCKExtreme Installation & User Manual page 42

Tracking & Alert Operations
NOTE:
In this manual, when there is a reference to the Track button or the
Track LED it is referring to the button shown below located on the
front of the DriveDOCK Extreme
Enable Tracking & Alert
The Tracking button is enabled by default. The Alert function is not active
by default and it has to be enabled using the Eagle software via the mini-
USB connection to the DriveDOCK Extreme.
Please refer to the Eagle User Guide for more details on how to con gure
and enable the Tracking & Alert functions on the DriveDOCK Extreme.
The destination options of Tracking (Quick GPS message) and Alert
messages is managed by the Iridium Extreme handset.
Send Tracking Position
In order to send a tracking message, the following conditions must be ful lled.
1. Tracking LED is solid GREEN (Track button is enabled).
2. The Quick GPS feature must be con gured in the Extreme handset.
3. The Iridium Extreme handset is registered with the Iridium network.
4. The Iridium Extreme handset, has acquired enough satellite signals
and navigational data to calculate a GPS x.
To manually send a tracking message of the current location
1. Apply a single press to the Track button. The Track LED will ash
green for 5 seconds. A beep will sound (if con gured to do so in the
Eagle).
2. The Track LED will stop ashing after 5 Seconds.
42