Beam DriveDOCKExtreme Installation & User Manual page 21

Step 1 - Mounting the DriveDOCK Extreme cradle
The DriveDOCK Extreme is supplied with a universal RAM® mount bracket
that enables mounting to any at surface (vertical or horizontal) within
a vehicle, attached on a wall or on a table as required.
1. Attach one pivot base to the rear of the DriveDOCK Extreme using
the M4 screws supplied.
2. Secure the second pivot base to the location you have selected for
mounting the DriveDOCK Extreme. (screws shown not supplied)
3. Use the interconnecting arm of the RAM® mount to secure the
DriveDOCK Extreme to the pivot base and tighten into the desired
location rmly using the wing nut on the arm.
21