After the unit assembled, mount the unit to the ceiling or wall by steps below.
1.
Attach the mounting template to the ceiling or wall.
2.
Drill four holes, and then insert the screw anchors into the holes.
3.
Secure the bottom case of the unit to the ceiling or wall with the TP4×15 mm tapping screws.
Depending on the material of your mounting surface, you may require different screws and
Note
anchors than those supplied.
F
2-3: M
D
IGURE
OUNTING
10
Illustra Flex Series 1MP Wireless Cube
1 Screw anchors(×4)
2 TP4×15 tapping screws(×4)
IAGRAM