Drain Pump Replacement; Fill Box Replacement - Nortec GS 100 Installation, User & Maintenance Manual

Drain Pump Replacement

1. Drain the unit completely. If the pump is
broken use the auxiliary drain out port.
2. Shut off electrical power to the appliance.
3. Remove front and right doors.
4. Remove wiring connections to the pump.
5. Remove hoses attached to the pump.
6. Reverse above procedure to re-install.
NOTE: To avoid water spillage (some water
will be left on the tank bottom after manual
draining) use shop vac to remove left over
water.
Drain Pump Assembly

Fill Box Replacement

Leak test all water connections before
re-commissioning the humidifier.
Figure #36
- 36 -