Adjusting Printing According To The Media - Konica Minolta bizhub C203 Copy Operations

12
12.7.5

Adjusting printing according to the media

The print image can be adjusted for each type of paper that is used.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-40.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [5 Media Adjustment].
The Media Adjustment screen appears.
6
Touch the button for the paper type to be set.
– If the image is distorted with single-sided copying, select a paper type below "Front".
– If the image on the back side is distorted with double-sided copying, select a paper type below
"Back".
7
Touch [+] or [–] to adjust the setting between –8 and +7. An
adjustment is possible if the size of the white areas in missing
print or the white spots is 0.5 mm or less.
– For missing print or white spots in the print image, touch [-]
to reduce the adjustment.
– For uneven printing of the print image, touch [-] to increase
the adjustment.
– Each time [+] or [–] is touched, the value is increased or
decreased by one increment.
– To cancel the adjustment, touch [Cancel].
12-50
Utility mode
bizhub C353/C253/C203 (FE2)