Baxi Nuvola 3 Comfort Operating And Installation Instructions page 8

3.6.2. Groups of days
This function allows you to programme 4 shared boiler switching on and switching cycles for several days or for the whole week (see
summary below).
To set a single time band, proceed as follows:
1) Press IP and then
;
2) a GROUP of days by pressing +/-
3) Press OK;
4) repeat the operations from points 4 to 10 of section 3.6.1.
Summary of available groups of days
"MO-FR" DAY 1 2 3 4 5
"SA-SU" DAY
"MO-SA" DAY 1 2 3 4 5 6
"MO-SU" DAY 1 2 3 4 5 6 7
3.7 HOURLY PROGRAMMING DOMESTIC HOT WATER MODE
This function allows you to programme 4 boiler time bands in the
DHW mode during the week (the programmed time bands are
identical for every day of the week).
To set hourly programming in the DHW mode, proceed as
follows:
1) press IP and then
to access programming (heating and DHW);
2) select the DHW programme "HW PR" by pressing +/-
repeatedly;
3) press OK:
4) set the time bands in which DHW is to be made available by repeating
the operations from points 4 to 10 of section 3.6.1 (factory setting
06:00 - 23:00).
IMPORTANT:
to enable weekly programming, the fitter must set the parameter "HW PR" = 2, as described in section 20.1.
INSTRUCTIONS FOR USERS
;
Monday to Friday
6 7 Saturday and Sunday
Monday to Saturday
Every day in the week
8
FACTORY SETTINGS
As per table in section 3.6.1.
07:00 – 23:00
As per table in section 3.6.1.
As per table in section 3.6.1.
C607215 - GB