Configuration And Registration; Configuring Via Web Page - Xorcom XP0100 User Manual

XP0100 Enterprise IP Phone Getting Started

Configuration and Registration

If you are administrator, you need to do some simple configuration to make the phone
work. If not, please contact with your internet administrator or service provider for
more information.

Configuring via Web Page

Press on the keypad of the phone to enter the status page and find out the IP
address of IP phone. Enter the IP address (for example http://192.168.3.28) into the
address bar of web browser. The default login name and password for administrator are
admin/admin. The default login name and password for user are user/user.
Note:
Please locate your PC in the same network segment of IP phone (192.168.3.X) to
access the web configuration page. Contact your system administrator for more
information.
Network Settings
Click on Network-> Basic->WAN.
DHCP: By default the phone attempts to contact a DHCP Server in your network in
order to obtain its valid network settings, e.g. IP address, sub mask, gateway, DNS
server, etc.
Static IP Address: If your phone cannot contact a DHCP Server for any reason, you
need to enter the network settings manually via Static IP Address. Please contact your
internet administrator for more information.
PPPoE: If you are using the xDSL Modem, you can connect your phone to the internet
via PPPoE mode. Please contact your ITSP for the User Name and Password for internet
access.
Note:
Using the wrong network parameters may result in inaccessibility of your phone and
may also have an impact on your network performance. Please contact your network
administrator.
Xorcom Ltd. 5 www.xorcom.com