KYMCO MXU 300 User Manual page 318

16
. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
BATTERY
REMOVAL/INSTALLATION
1. Make sure the ignition switch is OFF.
2. Pull right the lock lever and pull up the
seat at the rear.
3. ON ROAD:
Hang license light holder (1), by
removing the left mount bolt (2) and
loosen the right mount bolt (3)
.
4. Remove the battery cover (4) by
removing the screws (5).
Bolts
MXU 300/250
Seat
Lock Lever
Battery Holder
16-4