Tuning To Preset Stations; Naming Preset Stations - Sony HT-M77 Operating Instructions Manual

2
Tune to the station that you want to
preset (page 31).
3
Press TUNING MEMORY.
4
Press PRESET + or PRESET – to
select a preset number.
5
Press .
The station is stored as the selected
preset number.
6
Repeat steps 2 to 5 to store
another station.
Tuning to preset
stations
1
Press TUNER repeatedly (or press
FM or AM) to select the FM or AM
band.
You can also use INPUT SELECTOR
on the receiver.
2
Press PRESET + or PRESET –
repeatedly to select the station.
Each time you press the button, you
can select a preset station as follows:

Naming preset stations

1
Press TUNER repeatedly (or press
FM or AM) to select the FM or AM
band.
You can also use INPUT SELECTOR
on the receiver.
2
Tune to the preset station which
you want to create an index name
(page 32).
3
Press AMP MENU.
4
Press V/v repeatedly to select
"TUNER", then press
32
GB
5
6
7
or b.
Press V/v repeatedly to select
"NAME IN", then press
The cursor flashes and you can enter a
character.
Press V/v to select a character,
then press B/b to move the input
position backward and forward.
You can enter up to 8 characters to
name the station.
Tips
• You can select the character type as
follows by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without
selecting a character.
If you made a mistake
Press B/b until the character you want
to change flashes, then press V/v to
select the correct character.
Repeat step 6 to input a character
one by one, then press
The name you entered is registered.
or b.
.