Sony HT-M77 Operating Instructions Manual page 35

Notes
• To use a Bluetooth device connected to this
receiver, the Bluetooth device must support the
same profile as this receiver. Even if the device
supports the same profile, the functions may
differ depending on the specifications of the
Bluetooth device.
• The audio playback on this receiver may be
delayed from that on the Bluetooth device
because of the characteristics of the Bluetooth
wireless technology.
Pairing the receiver
with a Bluetooth device
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be performed
again.
1
Place the Bluetooth device within
1 meter from this receiver.
2
Press BLUETOOTH.
You can also use INPUT SELECTOR
on the receiver.
"PAIRING" appears and "BT" flashes
quickly on the display panel.
Perform step 3 within 5 minutes,
otherwise pairing will be canceled. In
this case, repeat this step.
Note
Set the Bluetooth device in pairing mode.
For details on setting the Bluetooth device in
pairing mode, refer to the operating
instructions supplied with the device.
3
Perform pairing on the Bluetooth
device to detect this receiver.
For details, refer to the operating
instructions of your Bluetooth device.
Note
When establishing a connection with this
receiver, select the audio profile (A2DP,
AVRCP) at the Bluetooth device. If the
Bluetooth device does not support the
AVRCP profile, you cannot perform
playback or other operations with this
receiver (page 34).
4
Select your receiver's name (for
example, "HT-M77") on the
Bluetooth device display.
If the receiver's name is not displayed,
repeat from step 1.
Note
If passkey is required on the display of the
Bluetooth device, enter "0000".
5
Once pairing is completed, the
device is automatically connected
to the receiver.
Device name appears and "BT" lights
up on the display panel.
6
Start playback on the Bluetooth
device.
7
Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
receiver.
Notes
• Passkey may be called "Passcode", "PIN code",
"PIN number" or "Password".
• You can pair up to 9 Bluetooth devices. If 10th
Bluetooth device is paired, the least recently
connected device will be replaced by the new
one.
• Pairing from another Bluetooth device is not
possible when the receiver is connecting to a
Bluetooth device.
• Depending on the type of Bluetooth device, you
can adjust the volume using the controls of the
Bluetooth device.
35
GB