To Stop Playback - Sony HT-M77 Operating Instructions Manual

1
Download and install the "NFC
Easy Connect" app.
Download the free Android app from
Google Play by searching for "NFC
Easy Connect" or access it by using the
two-dimensional code below. Data
communication fees may be charged.
Two-dimensional code
access
*Use a two-dimensional code reader app.
Notes
• The app may not be available in some
countries/regions.
• Depending on your smartphone, you can
use the NFC function without installing the
app. In this case, the operations and
specifications may differ. For details, refer
to the operating instructions of your
smartphone.
Compatible smartphones
Smartphones with a built-in NFC function
2
Start the "NFC Easy Connect" app
on the smartphone.
Make sure that the app screen is
displayed.
3
Hold the smartphone near to the
N-Mark on the receiver until the
smartphone vibrates.
Vibration cue is provided when the
smartphone is recognized by the
receiver.
After being recognized by the receiver,
follow the on-screen instructions
displayed on the smartphone, and
complete the procedure for Bluetooth
connection.
38
GB
Notes
• The receiver only can recognizes and connects
to one NFC-compatible device at a time.
• Depending on your smartphone, you may need
to turn on the NFC function on your smartphone
in advance. For details, refer to the operating
instructions of the smartphone.
Tip
*
for direct
If pairing and the Bluetooth connection fail, do
the following.
– Relaunch "NFC Easy Connect" and move the
– Remove the case from the smartphone if using
To listen to music
Start playback of an audio source on the
smartphone. For details on playback
operations, refer to the operating
instructions of your smartphone.
Tip
If the volume level is low, adjust the volume of
the smartphone first. If the volume level is still
too low, adjust the volume level on the receiver.

To stop playback

The playback will be stopped when you
perform any of the following items:
– Hold the smartphone near to the
– Stop the music player of the smartphone.
– Turn off the receiver or the smartphone.
– Change the function.
– Disable the Bluetooth function on the
smartphone slowly over the
a commercially available smartphone case.
the receiver again.
smartphone.
.
on